Nationwide · England, Scotland & Wales
Lantern Roof Installation across the UK
Roof lanterns that flood your extension with daylight, without leaks.
In short
Lantern Roof Installation is a UK service that fits pitched glazed roof lights, known as roof lanterns, into flat roofs on extensions, kitchens and orangeries. Installers build or adapt the timber kerb, trim the roof structure, seal the upstand into the roof membrane and fit an aluminium or uPVC lantern with insulated, toughened or laminated double or triple glazing.
- Free, no-obligation quotes
- Vetted, insured specialists
- Clear fixed prices
Fixed, clear prices
One all-in price before any work starts.
Vetted specialists
Insured teams who do this work every week.
Responsible disposal
Licensed waste routes and proper paperwork.
500 areas covered
Pages for every town we serve.
A roof lantern turns a dim extension into the brightest room in the house. Light pours down from above rather than through the side, reaching the middle of deep kitchens and living spaces that windows never touch. The catch is that a lantern is a big hole in a flat roof, and the join between the two is where leaks start. We arrange lantern roof installation across the UK through vetted, insured local specialists who get that junction right.
Our installers fit slim-profile aluminium lanterns, budget-friendly uPVC models and bespoke shapes for orangeries and large open-plan extensions. They can fit a lantern into a new roof while it is being built, or cut one into an existing flat roof with the right structural support. Tell us the room, roof type and the size you have in mind. A local specialist will survey, advise on structure and glazing, and give a clear quote.
Our Lantern Roof Installation services
Aluminium Roof Lanterns
Slim, strong, thermally broken aluminium lanterns in any RAL colour, with narrow sightlines and large glass panes.
Find out more →uPVC Roof Lanterns
Cost-effective lanterns with reinforced uPVC frames and aluminium-capped outer profiles, ideal for smaller extensions.
Find out more →New Lantern in an Existing Flat Roof
Cutting a new opening into an existing roof, trimming joists, building a kerb and integrating it into the membrane.
Find out more →Lantern Kerbs and Upstands
Building insulated timber kerbs or fitting prefabricated insulated upstands, the critical base that keeps lanterns watertight.
Find out more →Orangery and Bespoke Lanterns
Large or unusual shaped lanterns for orangeries, open-plan extensions and listed or period properties.
Find out more →Lantern Replacement and Repair
Replacing old, leaking or misted lanterns and polycarbonate tops with modern glazed lanterns on new or upgraded kerbs.
Find out more →How it works
Share your plans
Use the quote form to tell us the room, roof type and size, whether the roof is new or existing, and the lantern size and style you like. Photos inside and of the roof help the installer understand the job.
Survey and structural check
A local installer measures the roof and room, checks joist direction, roof build-up and membrane condition, and advises on lantern size, glazing and whether structural calculations or Building Regulations approval are needed.
Quote and design
You receive an itemised quote covering the lantern, kerb, structural work, roofing integration, internal finishing and waste. Once agreed, final drawings are confirmed and the lantern is ordered, typically two to four weeks.
Kerb, roof and installation
The opening is formed or prepared, the kerb is built and wrapped in membrane, then the lantern is fixed, glazed and sealed. The roof is kept watertight throughout, with temporary covers if weather turns.
Internal finish and handover
The reveal is boarded and plastered, sealants checked and the site cleaned. You receive guarantee details for the lantern and glazing, any certificates, and advice on cleaning and maintaining seals.
Lantern Roof Installation prices
Roof lantern prices depend on size, frame material, glazing specification and how much roofing and structural work is needed around the lantern. Fitting into a new roof under construction is cheapest. Cutting into an existing roof costs more because of trimming, kerb building and making good. These are typical UK guide prices for 2026, supplied and fitted.
| Job | Guide price | Notes |
|---|---|---|
| uPVC roof lantern, small (around 1m by 2m) | £1,200–£2,200 | Fitted onto a ready kerb on a new or existing roof, including glazing. |
| Aluminium roof lantern, medium (around 1.5m by 2.5m) | £2,500–£4,500 | Thermally broken frame, double glazing, powder-coated colours inside and out. |
| Large aluminium lantern (around 2m by 4m) | £4,500–£8,000 | Larger spans may need extra ridge support and lifting equipment on installation day. |
| New opening in existing flat roof | £1,500–£3,500 extra | Propping, trimming joists, building kerb, roof integration and internal plastering. |
| Insulated kerb or upstand only | £400–£1,000 | Depends on size and whether timber kerb or prefabricated upstand is used. |
| Lantern replacement on existing kerb | from £2,000 | Removal of the old lantern, re-sealing and new lantern fitted the same day. |
Who we work for
Kitchen extension owners
Homeowners with deep single-storey kitchen extensions where side windows do not reach the middle of the room, who want daylight over the island or dining table.
Extension builders
Builders and homeowners building new extensions who need a lantern supplied and fitted to the drawings, coordinated with the roofer and with the right thermal performance for sign-off.
Orangery owners
Owners of orangeries and garden rooms who want a central lantern replaced or upgraded with better glazing to make the room usable year-round.
Owners of leaking lanterns
People with old polycarbonate or failing lanterns that leak, mist or lose heat, who want a reliable replacement on a properly built kerb.
Garage conversion projects
Homeowners converting a flat-roofed garage into a living space who want to bring in natural light without changing the front elevation.
Rules and standards that apply
- Installing a replacement rooflight is notifiable building work in England and Wales and must meet energy efficiency requirements in Approved Document L; it can be self-certified by an installer registered with a competent person scheme or notified to building control.
- Cutting a new opening in an existing roof is a structural alteration that normally requires Building Regulations approval, as the roof structure must be adequately supported around the opening.
- The Work at Height Regulations 2005 require lantern installation on roofs to be planned with suitable access and fall protection.
- Listed buildings require listed building consent for alterations such as adding a roof lantern, and conservation areas may have additional planning controls.
How to choose the right lantern roof installation company
- Ask who builds the kerb and who integrates the roof membrane, as this junction is where most leaks start.
- Check the lantern's stated whole-unit U-value and that it will satisfy building control for your project.
- Ask what glass is specified, including whether the inner pane is laminated or toughened for safety overhead.
- Confirm whether the installer is registered with a competent person scheme or will notify building control.
- Request drawings showing the lantern size, bar layout and structural work before anything is ordered.
- Make sure they hold public liability insurance and provide written guarantees for frame, glass and workmanship.
Frequently asked questions
How much does a roof lantern cost to install in the UK?
A fitted roof lantern typically costs £1,200 to £2,200 for a small uPVC model and £2,500 to £4,500 for a medium aluminium lantern in the UK in 2026. Large or bespoke lanterns can cost £4,500 to £8,000 or more. Cutting a new opening into an existing roof usually adds £1,500 to £3,500 for structural and roofing work.
Can a roof lantern be fitted to an existing flat roof?
Yes, a roof lantern can be added to an existing flat roof. The roof is propped, an opening is cut, and joists are trimmed with doubled timbers to carry the load. A kerb is built and the roof membrane sealed around it. This usually needs Building Regulations approval and sometimes a structural calculation for larger openings.
Do I need planning permission for a roof lantern?
Many roof lanterns on single-storey rear extensions do not need planning permission, but it depends on the property and location. Conservation areas, listed buildings and lanterns that change the roof height significantly may need consent. Check with your local planning authority. Building Regulations requirements are separate and often apply.
Are roof lanterns prone to leaking?
Roof lanterns do not leak if they are installed properly. Most leaks come from badly built kerbs, poor membrane detailing at the corners, low upstands or failed seals on cheap older models. A level, square kerb at least 150mm above the roof, with the membrane properly dressed and sealed, is the key to a watertight lantern.
What is the difference between a roof lantern and a skylight?
A roof lantern is a pitched, three-dimensional glazed structure that sits above the roof, while a skylight or flat rooflight is a single flat or slightly sloped pane. Lanterns let in light from several angles and create a feeling of height inside. Flat rooflights have a lower profile and a more minimal, contemporary appearance.
Do roof lanterns make rooms too hot?
Roof lanterns can cause overheating on sunny days if standard clear glass is used, especially on south-facing roofs. Solar control glass reduces heat gain significantly while still letting in plenty of daylight. Some lanterns also offer opening vents, which help release warm air. Discuss orientation and glazing options with the installer before ordering.
How long does it take to install a roof lantern?
Fitting a lantern onto a ready kerb usually takes half a day to a day. Adding a lantern into an existing flat roof, including cutting the opening, trimming joists, building the kerb, sealing the roof and plastering inside, typically takes two to four days. Lanterns are made to measure, with lead times of around two to four weeks.
Aluminium or uPVC roof lantern: which is better?
Aluminium lanterns are stronger, so they have slimmer bars, larger glass and a sleeker look, and they come in more colours. uPVC lanterns are cheaper and perform well thermally but have chunkier bars. For large or design-led extensions aluminium is usually preferred, while uPVC is a good budget option for smaller rooms and garden rooms.
Lantern Roof Installation guides
How Much Does a Roof Lantern Cost in the UK? 2026 Fitted Prices
A small uPVC roof lantern of around 1m by 2m typically costs £1,200–£2,200 fitted onto a ready kerb. A medium aluminium lantern of around…
Read the guide →Aluminium vs uPVC Roof Lanterns: Which Should You Choose?
Aluminium roof lanterns have slimmer frames, greater strength for larger spans and a wide choice of powder-coated colours, with thermal…
Read the guide →Do Roof Lanterns Need Building Regulations or Planning Permission?
In England and Wales, installing a replacement rooflight is notifiable building work and must meet Approved Document L energy requirements;…
Read the guide →Roof Lantern vs Flat Rooflight: Which Is Best for Your Extension?
A roof lantern is a pitched, raised glazed structure that brings in light from several angles and adds height and character to a room. A…
Read the guide →Roof Lantern Leaking? Causes, Condensation and How to Fix It
Most roof lantern leaks come from the kerb and membrane junction, failed glazing seals, damaged ridge or hip caps, or blocked drainage…
Read the guide →Areas we cover
We cover England, Scotland and Wales, with dedicated pages for 500 towns and cities. If your town isn't listed, ask anyway — we probably cover it.
Get a free lantern roof installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote