Lantern Roof Installation
Aluminium Roof Lanterns
Slim, strong, thermally broken aluminium lanterns in any RAL colour, with narrow sightlines and large glass panes.

What's involved
Aluminium lanterns are the most popular choice for modern extensions because the strength of the metal allows slim glazing bars and bigger panes of glass, so more light comes through and the frame looks neater from inside. Quality systems use thermally broken profiles so the inside of the frame stays warm and resists condensation. Frames are powder coated, often anthracite grey or black outside and white or matching inside. The lantern is made to order from your measurements, which usually takes two to four weeks. On the day, the installer checks the kerb is level and square, fixes the base frame down, then fits the ridge, hip and glazing bars and drops the sealed units in, finishing with caps and seals. Most domestic lanterns are fitted in a day once the kerb and roof are ready.
How we handle it
Share your plans
Use the quote form to tell us the room, roof type and size, whether the roof is new or existing, and the lantern size and style you like. Photos inside and of the roof help the installer understand the job.
Survey and structural check
A local installer measures the roof and room, checks joist direction, roof build-up and membrane condition, and advises on lantern size, glazing and whether structural calculations or Building Regulations approval are needed.
Quote and design
You receive an itemised quote covering the lantern, kerb, structural work, roofing integration, internal finishing and waste. Once agreed, final drawings are confirmed and the lantern is ordered, typically two to four weeks.
Kerb, roof and installation
The opening is formed or prepared, the kerb is built and wrapped in membrane, then the lantern is fixed, glazed and sealed. The roof is kept watertight throughout, with temporary covers if weather turns.
Internal finish and handover
The reveal is boarded and plastered, sealants checked and the site cleaned. You receive guarantee details for the lantern and glazing, any certificates, and advice on cleaning and maintaining seals.
Price guide
Roof lantern prices depend on size, frame material, glazing specification and how much roofing and structural work is needed around the lantern. Fitting into a new roof under construction is cheapest. Cutting into an existing roof costs more because of trimming, kerb building and making good. These are typical UK guide prices for 2026, supplied and fitted.
- New opening in existing flat roof: £1,500–£3,500 extra. Propping, trimming joists, building kerb, roof integration and internal plastering.
- Large aluminium lantern (around 2m by 4m): £4,500–£8,000. Larger spans may need extra ridge support and lifting equipment on installation day.
- Aluminium roof lantern, medium (around 1.5m by 2.5m): £2,500–£4,500. Thermally broken frame, double glazing, powder-coated colours inside and out.
Questions about aluminium roof lanterns
Are roof lanterns prone to leaking?
Roof lanterns do not leak if they are installed properly. Most leaks come from badly built kerbs, poor membrane detailing at the corners, low upstands or failed seals on cheap older models. A level, square kerb at least 150mm above the roof, with the membrane properly dressed and sealed, is the key to a watertight lantern.
Do roof lanterns make rooms too hot?
Roof lanterns can cause overheating on sunny days if standard clear glass is used, especially on south-facing roofs. Solar control glass reduces heat gain significantly while still letting in plenty of daylight. Some lanterns also offer opening vents, which help release warm air. Discuss orientation and glazing options with the installer before ordering.
Aluminium or uPVC roof lantern: which is better?
Aluminium lanterns are stronger, so they have slimmer bars, larger glass and a sleeker look, and they come in more colours. uPVC lanterns are cheaper and perform well thermally but have chunkier bars. For large or design-led extensions aluminium is usually preferred, while uPVC is a good budget option for smaller rooms and garden rooms.
Other services
uPVC Roof Lanterns
Cost-effective lanterns with reinforced uPVC frames and aluminium-capped outer profiles, ideal for smaller extensions.
New Lantern in an Existing Flat Roof
Cutting a new opening into an existing roof, trimming joists, building a kerb and integrating it into the membrane.
Lantern Kerbs and Upstands
Building insulated timber kerbs or fitting prefabricated insulated upstands, the critical base that keeps lanterns watertight.
Orangery and Bespoke Lanterns
Large or unusual shaped lanterns for orangeries, open-plan extensions and listed or period properties.
Lantern Replacement and Repair
Replacing old, leaking or misted lanterns and polycarbonate tops with modern glazed lanterns on new or upgraded kerbs.
Aluminium Roof Lanterns near you
Get a free lantern roof installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote