Lantern Roof Installation
Lantern Replacement and Repair
Replacing old, leaking or misted lanterns and polycarbonate tops with modern glazed lanterns on new or upgraded kerbs.

What's involved
Older lanterns, especially polycarbonate-glazed models from the 1990s and 2000s, often leak, rattle in the wind, lose heat and turn cloudy. Replacement involves removing the old lantern, checking the kerb for rot and level, rebuilding or upgrading it where needed, re-sealing the roof membrane and fitting the new lantern. If only one or two glass units have misted, those sealed units can often be replaced individually. Leaks around lanterns usually come from failed seals at the kerb, damaged membrane at the corners, perished gaskets or blocked weep paths, so the installer will water-test to find the source before replacing anything. A straight lantern replacement on a sound kerb usually takes a day. Replacement rooflights count as notifiable work, so the installer should either be registered with a competent person scheme or notify building control.
How we handle it
Share your plans
Use the quote form to tell us the room, roof type and size, whether the roof is new or existing, and the lantern size and style you like. Photos inside and of the roof help the installer understand the job.
Survey and structural check
A local installer measures the roof and room, checks joist direction, roof build-up and membrane condition, and advises on lantern size, glazing and whether structural calculations or Building Regulations approval are needed.
Quote and design
You receive an itemised quote covering the lantern, kerb, structural work, roofing integration, internal finishing and waste. Once agreed, final drawings are confirmed and the lantern is ordered, typically two to four weeks.
Kerb, roof and installation
The opening is formed or prepared, the kerb is built and wrapped in membrane, then the lantern is fixed, glazed and sealed. The roof is kept watertight throughout, with temporary covers if weather turns.
Internal finish and handover
The reveal is boarded and plastered, sealants checked and the site cleaned. You receive guarantee details for the lantern and glazing, any certificates, and advice on cleaning and maintaining seals.
Price guide
Roof lantern prices depend on size, frame material, glazing specification and how much roofing and structural work is needed around the lantern. Fitting into a new roof under construction is cheapest. Cutting into an existing roof costs more because of trimming, kerb building and making good. These are typical UK guide prices for 2026, supplied and fitted.
- Aluminium roof lantern, medium (around 1.5m by 2.5m): £2,500–£4,500. Thermally broken frame, double glazing, powder-coated colours inside and out.
- uPVC roof lantern, small (around 1m by 2m): £1,200–£2,200. Fitted onto a ready kerb on a new or existing roof, including glazing.
- Lantern replacement on existing kerb: from £2,000. Removal of the old lantern, re-sealing and new lantern fitted the same day.
Questions about lantern replacement and repair
How much does a roof lantern cost to install in the UK?
A fitted roof lantern typically costs £1,200 to £2,200 for a small uPVC model and £2,500 to £4,500 for a medium aluminium lantern in the UK in 2026. Large or bespoke lanterns can cost £4,500 to £8,000 or more. Cutting a new opening into an existing roof usually adds £1,500 to £3,500 for structural and roofing work.
Can a roof lantern be fitted to an existing flat roof?
Yes, a roof lantern can be added to an existing flat roof. The roof is propped, an opening is cut, and joists are trimmed with doubled timbers to carry the load. A kerb is built and the roof membrane sealed around it. This usually needs Building Regulations approval and sometimes a structural calculation for larger openings.
Do I need planning permission for a roof lantern?
Many roof lanterns on single-storey rear extensions do not need planning permission, but it depends on the property and location. Conservation areas, listed buildings and lanterns that change the roof height significantly may need consent. Check with your local planning authority. Building Regulations requirements are separate and often apply.
Other services
Aluminium Roof Lanterns
Slim, strong, thermally broken aluminium lanterns in any RAL colour, with narrow sightlines and large glass panes.
uPVC Roof Lanterns
Cost-effective lanterns with reinforced uPVC frames and aluminium-capped outer profiles, ideal for smaller extensions.
New Lantern in an Existing Flat Roof
Cutting a new opening into an existing roof, trimming joists, building a kerb and integrating it into the membrane.
Lantern Kerbs and Upstands
Building insulated timber kerbs or fitting prefabricated insulated upstands, the critical base that keeps lanterns watertight.
Orangery and Bespoke Lanterns
Large or unusual shaped lanterns for orangeries, open-plan extensions and listed or period properties.
Lantern Replacement and Repair near you
Get a free lantern roof installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote