Lantern Roof Installation
uPVC Roof Lanterns
Cost-effective lanterns with reinforced uPVC frames and aluminium-capped outer profiles, ideal for smaller extensions.

What's involved
uPVC lanterns use reinforced plastic frames, often with an aluminium outer cap for strength and a cleaner look outside. They cost less than full aluminium systems and perform well thermally, which makes them a sensible choice for smaller kitchen extensions, garden rooms and garage conversions. The trade-off is chunkier glazing bars, so slightly less glass for the same footprint, and a smaller range of colours. Most come in white, grey or woodgrain foils. They are supplied as kits made to your kerb size and are usually fitted in half a day to a day. Make sure the internal finish matches the ceiling and any window frames in the room, and check that the product has a stated whole-unit U-value that will satisfy building control if the lantern is part of a new extension.
How we handle it
Share your plans
Use the quote form to tell us the room, roof type and size, whether the roof is new or existing, and the lantern size and style you like. Photos inside and of the roof help the installer understand the job.
Survey and structural check
A local installer measures the roof and room, checks joist direction, roof build-up and membrane condition, and advises on lantern size, glazing and whether structural calculations or Building Regulations approval are needed.
Quote and design
You receive an itemised quote covering the lantern, kerb, structural work, roofing integration, internal finishing and waste. Once agreed, final drawings are confirmed and the lantern is ordered, typically two to four weeks.
Kerb, roof and installation
The opening is formed or prepared, the kerb is built and wrapped in membrane, then the lantern is fixed, glazed and sealed. The roof is kept watertight throughout, with temporary covers if weather turns.
Internal finish and handover
The reveal is boarded and plastered, sealants checked and the site cleaned. You receive guarantee details for the lantern and glazing, any certificates, and advice on cleaning and maintaining seals.
Price guide
Roof lantern prices depend on size, frame material, glazing specification and how much roofing and structural work is needed around the lantern. Fitting into a new roof under construction is cheapest. Cutting into an existing roof costs more because of trimming, kerb building and making good. These are typical UK guide prices for 2026, supplied and fitted.
- Large aluminium lantern (around 2m by 4m): £4,500–£8,000. Larger spans may need extra ridge support and lifting equipment on installation day.
- Aluminium roof lantern, medium (around 1.5m by 2.5m): £2,500–£4,500. Thermally broken frame, double glazing, powder-coated colours inside and out.
- uPVC roof lantern, small (around 1m by 2m): £1,200–£2,200. Fitted onto a ready kerb on a new or existing roof, including glazing.
Questions about upvc roof lanterns
Are roof lanterns prone to leaking?
Roof lanterns do not leak if they are installed properly. Most leaks come from badly built kerbs, poor membrane detailing at the corners, low upstands or failed seals on cheap older models. A level, square kerb at least 150mm above the roof, with the membrane properly dressed and sealed, is the key to a watertight lantern.
Do roof lanterns make rooms too hot?
Roof lanterns can cause overheating on sunny days if standard clear glass is used, especially on south-facing roofs. Solar control glass reduces heat gain significantly while still letting in plenty of daylight. Some lanterns also offer opening vents, which help release warm air. Discuss orientation and glazing options with the installer before ordering.
Can roof lanterns be opened?
Some roof lanterns include electrically operated opening vents that help ventilate kitchens and release warm air in summer. Many have rain sensors that close the vent automatically. Opening vents add cost and need a power supply, so plan wiring early. Fixed lanterns are simpler and cheaper, with ventilation provided by windows or extractor fans instead.
Other services
Aluminium Roof Lanterns
Slim, strong, thermally broken aluminium lanterns in any RAL colour, with narrow sightlines and large glass panes.
New Lantern in an Existing Flat Roof
Cutting a new opening into an existing roof, trimming joists, building a kerb and integrating it into the membrane.
Lantern Kerbs and Upstands
Building insulated timber kerbs or fitting prefabricated insulated upstands, the critical base that keeps lanterns watertight.
Orangery and Bespoke Lanterns
Large or unusual shaped lanterns for orangeries, open-plan extensions and listed or period properties.
Lantern Replacement and Repair
Replacing old, leaking or misted lanterns and polycarbonate tops with modern glazed lanterns on new or upgraded kerbs.
uPVC Roof Lanterns near you
Get a free lantern roof installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote