Lantern Roof Installation

Lantern Roof Installation glossary

The terms you'll come across, explained in plain English.

Competent person scheme
A government-authorised scheme allowing registered installers to self-certify that certain building work complies with the Building Regulations.
Glazing bar
A structural bar supporting the edges of glass panes in a lantern. Slimmer bars give more glass and better sightlines.
Hip bar
The sloping bar running from the corner of a lantern to the ridge, where two glazed slopes meet.
Kerb
The raised frame on a flat roof that a lantern or rooflight sits on, lifting it above the roof surface and providing a sealing surface for the membrane.
Laminated glass
Glass made from layers bonded to a plastic interlayer that holds the glass together if broken. Commonly used as the inner pane of a lantern.
Ridge
The top horizontal bar of a lantern where the glazed slopes meet, usually finished with a ridge cap.
Roof lantern
A raised, pitched glazed structure fitted into a flat roof, bringing daylight into the room below from several angles.
Sealed glazing unit
Two or three panes of glass separated by a spacer and sealed at the edges, forming a double or triple glazed unit.
Sightlines
The visible width of frame and glazing bars. Narrower sightlines mean more glass and a lighter appearance.
Solar control glass
Glass with a coating that reduces solar heat gain and glare, helping prevent rooms below large lanterns overheating.
Thermal break
A low-conductivity strip separating the inner and outer parts of an aluminium frame, reducing heat loss and condensation on the frame.
Toughened glass
Glass heat-treated to be much stronger than standard glass, breaking into small, blunt pieces. Commonly used as the outer pane.
Trimmer
A joist fitted around an opening in a roof or floor to carry the loads of joists that have been cut to make the opening.
Upstand
A raised edge, either a timber kerb or prefabricated insulated unit, around a roof opening that the roof membrane turns up and seals against.
Weep holes
Small drainage openings in a lantern frame that let any water entering the frame escape outside. They must be kept clear.

Get a free lantern roof installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote