Lantern Roof Installation

Lantern Roof Installation

New Lantern in an Existing Flat Roof

Cutting a new opening into an existing roof, trimming joists, building a kerb and integrating it into the membrane.

Free Lantern Roof Installation quote

No obligation. We only use your details to reply about this job.

New Lantern in an Existing Flat Roof — Lantern Roof Installation

What's involved

Adding a lantern to an existing roof is structural work. The installer or builder first locates the joists, then props the roof, cuts the opening and fits doubled trimmer joists around it to carry the loads that the cut joists used to carry. The size and fixing of trimmers should be confirmed by a structural calculation for larger openings. A timber kerb or insulated upstand is built around the opening, usually at least 150mm above the finished roof surface. The roofer then dresses the membrane up the kerb and over the top, sealing all corners. Inside, the reveal is boarded, plastered and decorated. A new lantern in an existing roof usually takes two to four days. Cutting a new opening normally needs Building Regulations approval, and the roof covering around the opening may need replacing if it is old.

How we handle it

  1. Share your plans

    Use the quote form to tell us the room, roof type and size, whether the roof is new or existing, and the lantern size and style you like. Photos inside and of the roof help the installer understand the job.

  2. Survey and structural check

    A local installer measures the roof and room, checks joist direction, roof build-up and membrane condition, and advises on lantern size, glazing and whether structural calculations or Building Regulations approval are needed.

  3. Quote and design

    You receive an itemised quote covering the lantern, kerb, structural work, roofing integration, internal finishing and waste. Once agreed, final drawings are confirmed and the lantern is ordered, typically two to four weeks.

  4. Kerb, roof and installation

    The opening is formed or prepared, the kerb is built and wrapped in membrane, then the lantern is fixed, glazed and sealed. The roof is kept watertight throughout, with temporary covers if weather turns.

  5. Internal finish and handover

    The reveal is boarded and plastered, sealants checked and the site cleaned. You receive guarantee details for the lantern and glazing, any certificates, and advice on cleaning and maintaining seals.

Price guide

Roof lantern prices depend on size, frame material, glazing specification and how much roofing and structural work is needed around the lantern. Fitting into a new roof under construction is cheapest. Cutting into an existing roof costs more because of trimming, kerb building and making good. These are typical UK guide prices for 2026, supplied and fitted.

  • Large aluminium lantern (around 2m by 4m): £4,500–£8,000. Larger spans may need extra ridge support and lifting equipment on installation day.
  • Aluminium roof lantern, medium (around 1.5m by 2.5m): £2,500–£4,500. Thermally broken frame, double glazing, powder-coated colours inside and out.
  • uPVC roof lantern, small (around 1m by 2m): £1,200–£2,200. Fitted onto a ready kerb on a new or existing roof, including glazing.

Questions about new lantern in an existing flat roof

How much does a roof lantern cost to install in the UK?

A fitted roof lantern typically costs £1,200 to £2,200 for a small uPVC model and £2,500 to £4,500 for a medium aluminium lantern in the UK in 2026. Large or bespoke lanterns can cost £4,500 to £8,000 or more. Cutting a new opening into an existing roof usually adds £1,500 to £3,500 for structural and roofing work.

Can a roof lantern be fitted to an existing flat roof?

Yes, a roof lantern can be added to an existing flat roof. The roof is propped, an opening is cut, and joists are trimmed with doubled timbers to carry the load. A kerb is built and the roof membrane sealed around it. This usually needs Building Regulations approval and sometimes a structural calculation for larger openings.

Do I need planning permission for a roof lantern?

Many roof lanterns on single-storey rear extensions do not need planning permission, but it depends on the property and location. Conservation areas, listed buildings and lanterns that change the roof height significantly may need consent. Check with your local planning authority. Building Regulations requirements are separate and often apply.

Get a free lantern roof installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote