Guide · Homeowners · 3 min read · Updated 17 November 2026
How Much Does a Roof Lantern Cost in the UK? 2026 Fitted Prices
Short answer
A small uPVC roof lantern of around 1m by 2m typically costs £1,200–£2,200 fitted onto a ready kerb. A medium aluminium lantern of around 1.5m by 2.5m costs £2,500–£4,500, and a large 2m by 4m aluminium lantern £4,500–£8,000. Cutting a new opening in an existing flat roof adds £1,500–£3,500, and an insulated kerb alone costs £400–£1,000. Replacing a lantern on an existing kerb starts from £2,000.
Roof lantern prices by type and size
Roof lantern prices depend on three things: the frame material, the size and the work needed to prepare the roof. A lantern fitted onto a ready-made kerb on a new extension is the simplest job. Cutting into an existing roof, trimming joists and integrating the lantern into an old membrane is far more involved and costs more.
The table shows typical 2026 guide prices. They include the lantern, glazing and fitting, and assume normal access from a scaffold or tower already in place or easily erected.
| Work | Guide price | Notes |
|---|---|---|
| uPVC lantern, about 1m by 2m | £1,200–£2,200 | Fitted onto a ready kerb, glazing included |
| Aluminium lantern, about 1.5m by 2.5m | £2,500–£4,500 | Thermally broken, powder-coated colours |
| Large aluminium lantern, about 2m by 4m | £4,500–£8,000 | May need ridge support and lifting gear |
| New opening in existing flat roof | £1,500–£3,500 extra | Propping, trimming joists, kerb, plastering |
| Insulated kerb or upstand only | £400–£1,000 | Timber kerb or prefabricated upstand |
| Lantern replacement on existing kerb | from £2,000 | Remove old lantern, reseal, fit new same day |
What a typical project costs
For a new single-storey kitchen extension where the builder has already formed the opening and kerb, a medium aluminium lantern typically lands between £2,500 and £4,500. If you choose uPVC on a smaller extension, £1,200–£2,200 is common. These are the most straightforward jobs because the roofer finishes the membrane up the kerb and the lantern is lifted into place.
Adding a lantern to an existing flat roof is a bigger undertaking. The total for a medium aluminium lantern including the new opening, kerb, roof integration and internal plastering often falls between £4,000 and £8,000. If the existing roof covering is old, it may be sensible to replace the whole roof at the same time rather than patching around the new opening.
What affects the price
Size is the obvious factor, but glazing specification matters too. Standard double glazing with toughened outer and laminated inner panes is the norm. Upgrades such as solar control glass to reduce overheating, self-cleaning coatings and triple glazing all add cost. Frame colour can matter: most aluminium lanterns come in a choice of colours, while dual colours, with different shades inside and out, may cost more.
Installation complexity is the other big factor. Large lanterns are heavy and may need extra hands or lifting equipment. Roofs at first-floor height or above need scaffolding. Opening up an existing roof involves temporary propping, structural trimming, roof repairs and internal finishing.
- Frame material: aluminium or uPVC
- Size and number of glazed panes
- Glazing upgrades such as solar control or triple glazing
- Whether the kerb and opening already exist
- Roof height and access requirements
- Internal plastering and decoration around the opening
Kerbs and upstands
The kerb is the raised frame on the roof that the lantern sits on. It lifts the lantern above the roof surface so water cannot pool against the frame, and it provides a surface for the roofing membrane to turn up and seal against. A well-built, insulated kerb is what keeps a lantern watertight and free of condensation at the edges.
Kerbs are either built from timber on site or supplied as prefabricated insulated upstands made to suit the lantern. Prefabricated upstands cost more but are consistent and quick to fit. Expect £400–£1,000 for the kerb alone, depending on size and type.
Kerb height matters. Many installers and manufacturers recommend the top of the kerb sits at least 150mm above the finished roof surface, so standing water and snow cannot reach the lantern frame. On a warm roof, the kerb also needs insulating to the same standard as the roof, or a cold strip forms around the opening where condensation collects.
Long-term value
A roof lantern is a long-term investment in the feel of a room. It can transform a dark kitchen or extension, so it is worth choosing a frame and glazing that will perform well for many years. Aluminium generally offers slimmer frames, more colour choice and greater rigidity on larger spans, while uPVC is the cost-effective option for smaller lanterns.
Glazing choice affects comfort. A south-facing lantern with plain glass can make a room uncomfortably warm in summer, and solar control glass helps. Think about blinds too, as some lanterns can be fitted with them.
Costs people overlook
Check whether your quote includes scaffolding or towers, building control or competent person scheme certification, internal plastering and decoration, electrical work for lighting around the lantern and disposal of the old lantern on replacements. If the existing roof is in poor condition, you may also need roof repairs or replacement around the lantern.
On older properties or in conservation areas, there may be planning or listed building consent costs. Allow a little contingency if opening up an existing roof, in case the joists are not where expected or the deck needs repair.
Getting an accurate quote
Send the size you have in mind, the roof type, whether it is a new or existing roof, photos of the room and roof, and your preferred frame material and colour. A site survey is normal for anything involving a new opening. We arrange quotes from vetted, insured local lantern installers who can advise on size, glazing and kerb design and give one clear price.
Questions people also ask
How much does it cost to fit a roof lantern?
Fitted prices typically range from £1,200–£2,200 for a small uPVC lantern to £4,500–£8,000 for a large aluminium one. Cutting a new opening into an existing flat roof adds around £1,500–£3,500. Glazing upgrades, access and internal finishing can add to the total.
Is it expensive to add a roof lantern to an existing roof?
It costs more than fitting into a new extension because the roof must be propped, joists trimmed, a kerb built and the lantern sealed into the existing membrane, then plastering done inside. Expect around £1,500–£3,500 on top of the lantern price, sometimes more if the roof covering needs replacing.
What size roof lantern do I need?
A common rule of thumb is to keep a margin of solid roof around the lantern, so it looks balanced and the structure is not over-weakened. Many people choose a lantern covering around a fifth to a third of the ceiling area. A designer or installer can advise based on room size, orientation and joist layout.
Written and checked by the Lantern Roof Installation team. Read our editorial policy.
More guides
Aluminium vs uPVC Roof Lanterns: Which Should You Choose?
Aluminium roof lanterns have slimmer frames, greater strength for larger spans and a wide choice of powder-coated colours, with thermal breaks to…
Do Roof Lanterns Need Building Regulations or Planning Permission?
In England and Wales, installing a replacement rooflight is notifiable building work and must meet Approved Document L energy requirements; it can be…
Roof Lantern vs Flat Rooflight: Which Is Best for Your Extension?
A roof lantern is a pitched, raised glazed structure that brings in light from several angles and adds height and character to a room. A flat…
Roof Lantern Leaking? Causes, Condensation and How to Fix It
Most roof lantern leaks come from the kerb and membrane junction, failed glazing seals, damaged ridge or hip caps, or blocked drainage channels.…
Get a free lantern roof installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote