Lantern Roof Installation

Guide · Homeowners · 3 min read · Updated 17 November 2026

Roof Lantern vs Flat Rooflight: Which Is Best for Your Extension?

Short answer

A roof lantern is a pitched, raised glazed structure that brings in light from several angles and adds height and character to a room. A flat rooflight is a single glazed unit set almost level with the roof, giving a minimal, contemporary look. Lanterns suit kitchens and living spaces where you want a feature; flat rooflights suit minimalist designs, smaller spaces and roofs where height above the roof is restricted.

Roof Lantern vs Flat Rooflight: Which Is Best for Your Extension?

The key differences

Both options bring daylight into flat-roofed spaces, which are often the darkest parts of a house. The choice is mainly about appearance, how light enters the room and how the roof looks from upstairs windows and the garden.

A roof lantern has a pitched, hipped or gabled glass top on a frame and kerb, rising well above the roof. A flat rooflight is a single, large glazed unit sitting on a low kerb, nearly flush with the roof, often with a slight fall built into the upstand so rain runs off.

FeatureRoof lanternFlat rooflight
Appearance from insideRaised feature, extra ceiling heightClean, minimal opening
Appearance from outsideVisible above the roofLow profile, discreet
Light distributionFrom several anglesMainly from directly above
Rain run-offSheds water off pitched glassRelies on a slight fall
Typical frameAluminium or uPVC with glazing barsFrameless or slim frame
StyleTraditional to contemporaryContemporary

Why people choose roof lanterns

A roof lantern adds a sense of height and volume to a room. The raised glass draws the eye upwards and brings in light from several directions throughout the day. In kitchens and open-plan living spaces, a lantern often becomes the focal point, positioned over an island or dining table.

Lanterns also shed rain efficiently because their glass is pitched, which helps the glass stay cleaner. They come in many styles, from traditional with decorative ridges to slim contemporary aluminium designs, so they can suit both period homes and modern extensions.

  • Adds height and a focal point
  • Light enters from several angles
  • Pitched glass sheds rain well
  • Suits traditional and modern homes

Why people choose flat rooflights

Flat rooflights suit minimalist, contemporary designs. From inside, they give a crisp, frameless opening to the sky. From outside, they barely show above the roof, which matters where the roof is visible from upstairs windows or neighbours, or where planning considerations make a discreet profile preferable.

Flat rooflights rely on a slight fall, usually built into the kerb, so rain runs off. Even so, the glass gets dirtier than a lantern's pitched glass, as water and debris can sit on it more easily. Some flat rooflights can be opened for ventilation, and walk-on versions are available for roof terraces.

Light, heat and comfort

Overhead glazing lets in much more daylight than the same area of vertical window, which is why both options brighten a room so effectively. But overhead glass also brings in more summer heat. Large south-facing lanterns or rooflights can cause overheating, so solar control glass is worth considering.

Lanterns have more glass surface for a given footprint, so they can let in more light and heat. Flat rooflights are a single plane and easier to fit with blinds. In both cases, good glazing and some form of shading or ventilation helps keep the room comfortable year round.

Cost and installation

Roof lanterns typically cost £1,200–£2,200 for a small uPVC unit, £2,500–£4,500 for a medium aluminium unit and £4,500–£8,000 for a large aluminium unit, fitted onto a ready kerb. Flat rooflights vary widely depending on size and glazing, and large frameless units can be similarly priced.

Both need a well-built, insulated kerb and careful integration into the roof membrane. Both count as rooflights under the Building Regulations, so a replacement is notifiable work that must meet Approved Document L energy requirements, and a new opening in an existing roof is a structural alteration that normally needs approval.

Cleaning and maintenance

Neither option should be walked on unless it is a specifically designed walk-on rooflight, so cleaning has to be planned. Pitched lantern glass sheds rain efficiently and tends to stay cleaner, although dirt and leaves can collect along the ridge and at the base where the glass meets the frame. A soft brush on an extendable pole, used from a safe position, removes most debris. Self-cleaning glass coatings help further.

Flat rooflights collect more dirt, leaves and standing water because the glass is close to level, even with a built-in fall. They usually need cleaning more often to stay clear, particularly under trees. For both options, check once or twice a year that drainage paths around the kerb are clear, that seals look intact and that there is no moss building up against the upstand. Clearing debris regularly is the simplest way to avoid leaks and keep the glass bright.

  • Never stand on the glass or glazing bars
  • Brush away leaves and debris from a safe position
  • Check seals and drainage paths once or twice a year

Which to choose

Choose a lantern if you want a feature, extra ceiling height and light from several directions, particularly in a kitchen or family room. Choose a flat rooflight if you prefer a minimal look, want a discreet profile from outside or need a walk-on or opening unit. Some extensions combine both, with a lantern over the main space and flat rooflights over corridors or utility areas.

We arrange vetted, insured local installers who fit both roof lanterns and flat rooflights and can advise on which suits your room, roof and budget.

Questions people also ask

Do roof lanterns let in more light than flat rooflights?

For the same footprint, a lantern has more glass surface and lets light in from several angles, so it often feels brighter and brings light deeper into the room through the day. Flat rooflights admit light mainly from directly above. Glazing type and orientation also affect how much light enters.

Are flat rooflights more likely to leak?

Not if installed correctly. Flat rooflights rely on a slight fall, usually built into the kerb, to shed water. Problems usually come from poor kerb construction or membrane detailing rather than the unit itself. Pitched lanterns shed water faster, but both need careful installation to stay watertight.

Which is cheaper, a roof lantern or a flat rooflight?

It depends on size and specification. Small uPVC lanterns start around £1,200–£2,200 fitted, while large aluminium lanterns reach £4,500–£8,000. Flat rooflights vary widely, with large frameless units costing similar amounts. Installation costs for kerbs and roof integration are broadly similar for both.

Written and checked by the Lantern Roof Installation team. Read our editorial policy.

Get a free lantern roof installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote