Somerset · South West
Lantern Roof Installation in Bridgwater
From kitchen extensions to orangeries, we match Bridgwater homeowners with lantern installers who handle the roofing as well.
Our Bridgwater coverage
Bridgwater falls within Somerset, South West. That includes the TA6 and TA5 postcode districts. Nearby places we also cover include North Petherton, Cannington, Woolavington, Wembdon and Westonzoyland.
Local considerations in Bridgwater
Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Listed homes in Bridgwater need listed building consent for roof lanterns, so plan time for approval.
Single-storey kitchen extensions around Bridgwater are ideal candidates for a lantern over the island or dining area. Suburban driveways in Bridgwater make delivering and lifting lanterns straightforward on most installations.
Lantern Roof Installation jobs we handle in Bridgwater
Orangery and Bespoke Lanterns
Large or unusual shaped lanterns for orangeries, open-plan extensions and listed or period properties.
Lantern Kerbs and Upstands
Building insulated timber kerbs or fitting prefabricated insulated upstands, the critical base that keeps lanterns watertight.
New Lantern in an Existing Flat Roof
Cutting a new opening into an existing roof, trimming joists, building a kerb and integrating it into the membrane.
uPVC Roof Lanterns
Cost-effective lanterns with reinforced uPVC frames and aluminium-capped outer profiles, ideal for smaller extensions.
Aluminium Roof Lanterns
Slim, strong, thermally broken aluminium lanterns in any RAL colour, with narrow sightlines and large glass panes.
Lantern Replacement and Repair
Replacing old, leaking or misted lanterns and polycarbonate tops with modern glazed lanterns on new or upgraded kerbs.
How much it costs in Bridgwater
- Insulated kerb or upstand only: £400–£1,000. Depends on size and whether timber kerb or prefabricated upstand is used.
- Lantern replacement on existing kerb: from £2,000. Removal of the old lantern, re-sealing and new lantern fitted the same day.
- uPVC roof lantern, small (around 1m by 2m): £1,200–£2,200. Fitted onto a ready kerb on a new or existing roof, including glazing.
Prices are a guide. Your quote for Bridgwater is a fixed price based on the details you give us. Full price guide.
Lantern Roof Installation questions from Bridgwater
Can you fit a lantern to my existing roof in Bridgwater?
Yes, installers covering Bridgwater regularly add lanterns to existing flat roofs. The roof is propped, joists are trimmed, a kerb is built and the membrane is sealed. Building Regulations approval is usually required.
How much does a roof lantern cost in Bridgwater?
A fitted roof lantern in Bridgwater typically costs £1,200 to £2,200 for a small uPVC model and £2,500 to £4,500 for a medium aluminium lantern. Cutting into an existing roof costs extra. Send your details for an itemised local quote.
Who handles building control for a Bridgwater roof lantern?
Your installer or builder in Bridgwater normally arranges building control, either through Somerset or a registered building control approver, or self-certifies replacements through a competent person scheme.
Can a lantern go on a garage conversion in Bridgwater?
Yes, flat-roofed garage conversions in Bridgwater often gain a lantern to bring in daylight. The roof structure and insulation are checked to make sure they can accommodate the opening.
Are roof lanterns prone to leaking?
Roof lanterns do not leak if they are installed properly. Most leaks come from badly built kerbs, poor membrane detailing at the corners, low upstands or failed seals on cheap older models. A level, square kerb at least 150mm above the roof, with the membrane properly dressed and sealed, is the key to a watertight lantern.
How do you clean a roof lantern?
Roof lanterns are cleaned from outside using a soft brush or water-fed pole with plain water or a mild, non-abrasive cleaner. Self-cleaning glass reduces how often this is needed. Never walk on the glass. Inside, wipe frames and glass with a soft cloth. Check seals and keep the roof around the kerb clear of leaves.
Helpful guides
Roof Lantern Leaking? Causes, Condensation and How to Fix It
Most roof lantern leaks come from the kerb and membrane junction, failed glazing seals, damaged ridge or hip caps, or blocked drainage…
Read the guide →Aluminium vs uPVC Roof Lanterns: Which Should You Choose?
Aluminium roof lanterns have slimmer frames, greater strength for larger spans and a wide choice of powder-coated colours, with thermal…
Read the guide →Get a free lantern roof installation quote in Bridgwater
Tell us what you need and we'll come back with a clear price.
Request a quote